탭 드릴 크기 계산기
탭 드릴 크기 계산기을 일반적인 가공 공식과 엔지니어링 추정 로직으로 계산합니다. 셋업 검토와 조건 비교에 활용하세요.
✓ 브라우저에서 계산↔ 미터·인치 단위ƒ 공식 표시
01
가공 데이터 입력
기본값은 예시입니다. 실제 셋업 데이터로 변경하세요.
03
공식과 기술 참고
공식 / 계산 논리
Cutting tap: TD = D − Hp×P/76.98 for metric, or TD = D − Hp/(76.98×TPI) for inch 나사s. Forming tap approximation: TD = D − Hp×P/147.06 for metric, or TD = D − 0.0068×Hp/TPI for inch 나사s. Always verify with the tap manufacturer and 나사 class.
Cutting tap: TD = D − Hp×P/76.98 for metric, or TD = D − Hp/(76.98×TPI) for inch 나사s. Forming tap approximation: TD = D − Hp×P/147.06 for metric, or TD = D − 0.0068×Hp/TPI for inch 나사s. Always verify with the tap manufacturer and 나사 class.
엔지니어링 안내: 이 도구는 추정과 조건 검토용입니다. 실제 생산 전에는 공구 카탈로그, 장비 한계, 소재 데이터, 관련 표준으로 반드시 확인하세요.
자주 묻는 질문
Can this result be used directly on a CNC machine?
Use it as a starting value only. Check the tool manufacturer data, machine limits, workholding, coolant and material condition before production.
Which units does the calculator support?
The calculator shows the units beside each input. Select metric or inch units where the page provides a unit-system control.
Why can shop results differ from the calculation?
Tool geometry, coating, runout, rigidity, chip evacuation, material hardness and machine power can change the practical result.